Car Racks

The RV Rider bike rack for RV's, motorhomes, and fifth wheels carries 2 E-Bikes (up to 80 lbs. each) on the back of an RV Motorhome, a 5th wheel, or a flat towed vehicle. Special features include universal heavy-duty wheel holders for heavy load carrying capacity. These wheel holders can fit any tire up to 5" wide and include a ratchet wheel strap. Locking frame grabbers secure the bikes in place. The frame grabbers can attach to a bike's frame or seat tube with a diameter range of 1"- 2", therefore Bike Adapters are not needed and should not be used. A locking cable and keyed alike hitch pin secure the bikes to the rack and the rack to the vehicle. The bike rack folds up when not in use and can tilt down for rear cargo access. A double-walled receiver tube handles the extra weight of the electric bikes. An included hitch tightener reduces motion inside the hitch (the receiver hitch must have a flange). A minimum class 3 trailer hitch is required to use this bike rack. - Capacity: Two Bikes (Max. 80 lbs per bike) - Hitch Size: 2" only (Do not use a 1-1/4" -2" hitch adapter) - Maximum bike wheelbase: 60" - Maximum tire width: 5" - Features extra heavy-duty wheel holders, an internally reinforced frame and external brace for heavy load carrying capacity - Includes keyed alike locking hitch pin, 8' security cable and locking frame grabbers - For 20" Fat tire rear wheels you will need a Small Wheel Adapter (SW-ADP-U) to prevent derailleur hanger interference (You will only need one per bike) - Not intended for use with motorized gasoline bicycles, mopeds, motorcycles or 3 wheel bikes (trikes), or electric scooters - Rack Weight: 63.5 lb - Limited Lifetime Warranty

Transport your recumbents and save your back, too, with Hollywood's Sport Rider Recumbent rack that carries up to 2 'bents. Simply set your recumbent into the wheel holders (that are nice and low for easy mounting), then slide the padded universal clamp over the frames to secure them in place. This great rack fits recumbents with up to 74-inch wheelbases and includes small wheel adapters and extra tie downs to keep your rig in place. And, the Sport Rider folds up when not in use for easy storage and transportation. - Hitch Size: fits both 1 ¼ and 2-inch - Space between bikes: 18-inches - Not to be used on any trailer, fifth wheel or towed vehicle - Max weight capacity: 45 lbs per bike

Hollywood's SportRider SE2 rack uses padded universal top clamps and adjustable wheel holders to safely carry 2 bikes. Simply drop the bike into the wheel holders, then slide the self-locking clamp down onto the frame to secure the bike. The rack folds up when not in use, tilts down for easy cargo access, and includes a keyed-alike locking hitch pin and security cable. Plus, with an add-on kit (sold separately), the Sport Rider SE2 can bring along 4 bikes for your adventures. • Hitch Size: 2 inches • Max tire width: 3 inches • Max bike wheel base: 60 inches • Max weight capacity: 45 lbs per bike • Weight: 45 lbs • Not to be used on any trailer, fifth wheel, or towed vehicle

A must-have accessory for all bike lovers. Our new safety light bar fits almost every bike rack, making it safer and more secure to transport your bikes. The new LED Light bar will attach to any of our Sport Rider, RV Rider, or Trail Rider racks using included hardware. The flexible, durable LED Light bar can also attach to the outside bike on any of the Destination Bike racks, or any bike rack. Connect it to your car and let the light bar respond to all your moves. The light functions include brake lights, turn signals, and emergency flashers. Easy to install and use, this durable light for bike racks is a great add-on to your vehicle's safety features. Connects to 4-Pin Flat Includes 4 flat to 7-Pin round adapter Includes 4 Pin flat tester FREQUENTLY ASKED QUESTIONS LED Bar Functions: Brake lights (flash amber, then high brightness red) Running (low brightness red) Left turn signal (driver-side amber) Right turn signal (passenger side amber) Emergency flashers (both driver and passenger sides amber) Note: Reverse/backup lights are NOT included in the light bar, nor can they be added Technical specs: Input Voltage: 12VDC +/- 15% Operating temperature: -15 °C to 60 °C (5 °F to 140 °F) Waterproof/Dustproof Rating: IP67

- Adapts female specific and full suspension frames to be easily hung on car rack carriers - Locking ends ensure a firm hold on the bicycles seat tube and head tube for a secure fit - Makes transporting an unconventional frame by car rack much easier - Extends from 21.5" to 31" eye to eye

- Capacity: Bike Rack Carries Up To 2 Bikes (Max. 35 lbs. per bike) - Hitch Size: fits both 1-1/4"—2" - Comes fully pre-assembled - Max wheelbase: 48" - Max tire width: 3" - Fits 20" bikes—29ers/700c bikes - Folds up against back of the vehicle - Includes locking threaded hitch pin. If you want a locking threaded hitch pin that includes a keyed alike cable you will need to purchase the LHPTC - 360 degree rotating padded frame holders - Wheel trays with integrated ratchet straps - Not to be used on any trailer, fifth wheel or towed vehicle

Kuat Racks Phat Bike Kit. This item includes the strap extender for the rear tire strap and a secondary Velcro strap for the front tire.

- Hitch-mounted rack for carrying a single Trike, Fat Trike, or E-Trike - Folding mechanism allows the rack to fold flat against the vehicle when not in use, or down for access to the trunk or tailgate - Tie-down straps for frame and wheels hold the trike securely in place during transport - Large wheel cradles hold trikes with wheels from 16" to 29" and tires up to 5" wide - Adjustable boom length adapts to a variety of trike styles and lengths - Maximum weight capacity is 125 lbs *Rack must only be used with Class III or IV 2" receiver hitches

Shuttle Saver - Our new T2 pad is made to fit any shape of tailgate, and has an adjustable rear camera panel - both RF exclusive, patent pending features. Carry up to 6 bikes with no bike on bike crime with raised bumpers + downtube straps. Backup Plan - Exclusive to the T2 is the adjustable rear panel that allows for easy adaptation to any rear camera + handle position. Shape Shifter - Six adjustment straps along top edge of the installed pad provide a fit tailored to your tailgate’s shape - even curved! Just Say No - To bike on bike crime. The T2 features raised bumpers in the truck box that keep frame downtubes in place and secure, minimizing contact while shuttling. Specs - Construction: PVC tarpaulin with micro-brushed inner lining - Adjustment: Top edge adjustment, camera window adjustment - Other: Raised bike spacers and padding, hook-and-loop frame straps, lock loop Bike Capacity - Mid-Size Truck (Tacoma or similar): 5-bike - Full-Size Truck (Ford F-150, F-350 or similar): 6-bike

The Transfer v2 is more solid than ever. From the steel construction of the original to a new Flatlock hitch cam for enhanced stability in tow. Plus, a semi-integrated cable lock for an upgrade in security. The best part? The new Transfer v2 has the modular configurations available so you get a multi-rider rack at an everyone-friendly price. - Flatlock cam for 2", ball cam for 1.25" - Includes semi-integrated bicycle cable lock - Tamper-resistant hitch security - More robust hitch design for enhanced stability in tow - Holds up to a 50" wheelbase bike (previously 47") - Holds wheels 18"-29" (previously 20"-29") - Holds tires up to 5" with accessory strap (previously 4.5") + better hook clearance for loading fat bikes - Automotive-grade 750 hour salt spray hardware - Dedicated 2" hitch version in the 2 bike configuration can be directly mounted on campers, recreational vehicles, or trailers with CHASSIS MOUNTED RECEIVERS ONLY.

Saris’ Bones 3-Bike rack unites utilitarian strength and modern style. Crafted of incredibly strong, injection-molded plastic, the four arched leg mounts and two arched arms cradle your bikes on different levels to minimize unwanted handlebar and seat contact. Six highly adjustable straps, each equipped with soft, vinyl-coated hooks, hold the rack down, while the four legs have grippy rubber feet to provide a sturdy base that won't harm your vehicle's finish. Ratcheting, soft-touch, anti-sway straps ensure a tight grasp on your bikes. The Bones is made out of 100% recyclable, non-rusting parts and fits almost all vehicles—even those with spoilers. Plus, it folds fast for easy portability and storage.

Protect your rides during transport and save your back, too, with Hollywood's Sport Rider rack that carries up to 2 bicycles. Simply set any bike into the wheel holders (that are nice and low for easy bike mounting), then slide the padded universal clamp over the frames to secure the bikes. This great rack also includes Hollywood's No-Wobble system that prevents rack sway and holds your bikes steady even when the road is less than ideal. The Sport Rider folds for easy storage, too, and comes with Velcro wheel straps for top-notch safety. - Max weight capacity: 45 lbs per bike - Hitch Size: fits both 1 ¼ and 2-inch - Not to be used on any trailer, fifth wheel, or towed vehicle

Transport your rides and save your back, too, with Hollywood's Sport Rider rack that carries up to four bicycles. Simply set any bike into the wheel holders (that are nice and low for easy bike mounting), then slide the padded universal clamp over the frames to secure the bikes. This great rack also includes Hollywood's No-Wobble system that prevents rack sway and holds your bikes steady even when the road is less than ideal. For even more convenience, the Sport Rider is designed as a 2+2, so you can use it as either a 4-bike or 2-bike rack. And, it folds down when not in use for easy transport, storage, and cargo door access. - Capacity: Four Bikes/180 lbs (max. 45 lbs per bike) - Hitch Size: 2-inch only - Not to be used on any trailer, fifth wheel, or towed vehicle

Kuat's NV 2.0 Base is loaded with features that make it one of the most equipped platform racks on the planet. This darkened brute features Kuat's foot lever pivot release, adjustable cradles for increased bike fit, integrated cable locks, a hand-tight cam system, and a ballistic black powder coat that will stand up to years of abuse. - Adjustable front tire cradle system - Re-designed pivot with optional foot assist - Fully integrated cable locks and hitch lock included - Front tire ratchet with an intuitive release - Rear tire strap features a co-molded strap to protect wheels - No-tool install with hand tight hitch cam system - Premium matte powder coat - 2 Bike capacity up to 60 lbs. each - Holds wheelbases up to 48-inch and tires as large as 4.8-inch - Available in both 2-inch & 1.25-inch hitch sizes - Dedicated 2-inch model is able to carry up to 4 bikes with optional NV Add-On 2.0 Base

The fully foldable, compact, and easy-to-use hitch-mounted bike rack for all types of bikes. Thule EasyFold XT 2 hitch bike rack is a fully foldable, compact, and easy-to-use hitch-mounted bike rack for a wide range of bikes and e-bikes. Loading heavy bikes is effortless and with the optional loading ramp, it’s even easier. This durable bike rack also gives you full access to the trunk even when bikes are loaded. Fold the bike rack to a compact size and stow it in your trunk, perfect for an impromptu bike adventure. For unusual bike geometries or oversized frames, bring your bike to one of our Thule dealers and test it out. Features: - Easy mounting of bikes through detachable bike arms with lockable - Thule AcuTight torque limiter knobs that “click” when optimal torque is reached - Fully foldable for convenient mounting, handling, and storage - Wheel straps with adjustable pump buckles for fastening wheels. (Optional XXL Wheel Strap kit to fit longer wheelbases and tires up to 4.7") - High load capacity enabling transport of e-bikes and heavy mountain bikes - Easy trunk access even with bikes mounted, thanks to smart foot pedal tilt - Foldable bike loading ramp integrates into the rack for convenient storage (included) - Large distance between wheel holders enabling transport of sturdy bikes with large wheel bases - Ergonomic transport of the bike rack thanks to the integrated carrying handles - Lock your bikes to the bike rack and your bike rack to the receiver (locks included) - Thule Snug-Tite receiver lock virtually eliminates hitch rack movement in the receiver and locks the hitch rack to the vehicle

The Destination E for Electric Bikes is our new hitch bike rack designed specifically to carry electric bikes with any sized tire up to 4.5" wide. This new bike rack has a sleek and modern design and can carry up to two 70 lb. electric bikes or standard bikes. It includes an expandable, wide aluminum ramp so you can load and unload your bikes easily. The Destination E hitch-mounted bike rack can fold flat against the car when not in use and features "balanced tilting" where the pivot point is between the bikes for easy trunk access when the bikes are loaded. Other features include adjustable, keyed-alike locking frame and seat post clamps, ideal for unusual bike geometries as well as our No Wobble-No Tools Hitch Tightening System. - Capacity: Two Bikes (Max. 70 lbs. per bike) - Hitch Size: 2" only (Do not use a 1 1/4" - 2" hitch adapter) - Includes a 46" long ramp - Maximum bike wheelbase: 50” - Maximum tire width: 4.5” - Includes keyed-alike locking hitch pin and locking frame clamps - "No-Wobble Hitch System" eliminates slack between the receiver and the rack without the use of tools - Folds flat against car when not in use - Feature's "Balanced Tilting" with the pivot point between the 2 bikes, making tilting down for cargo door access as easy as it gets - The frame grabbers on this rack can hold step-through bikes by the seatpost, therefore Bike Adapters are not needed and should not be used - Includes optional fixed Frame Grabber to use in place of quick release option - Space between bikes: 11" - Rack Weight: 46 lbs. - Limited Lifetime Warranty - Fits round or oval tubing or seat posts between 1" and 2" in diameter - For step through bikes: Secure the bicycle by using the racks Frame Grabber around the bikes seat post - 4" Strap Extension Kits sold separately: STPEXT - Not to be used on front hitches - Not to be used with a bike cover - Not to be used with any 1-1/4" - 2" Adapter - Not to be used with any Hitch Extension longer than 8" - Not to be used on any trailer, fifth wheel or towed vehicle - CLASS B RV APPROVED ONLY (NOT APPROVED FOR CLASS A OR CLASS C RV'S)

Set of heavy duty wheel holders for Fat tire E-bikes and regular fat bikes for tires up to 5" wide

If you have a trunk or rear rack and a bike with an unconventional frame (such as a full-suspension or ladies bike), you probably need Sunlite's Crossbar Adapter. Vinyl-coated hooks on either end hold your bike and act as a "top tube" for easy transportation. In the middle, a quick-release telescoping adjustment ensures the Crossbar Adapter will fit almost any bike.

- Capacity: Two Bikes (Max. 80 lb per bike) - Hitch Size: 2" only (Do not use a 1-1/4" -2" hitch adapter) - Maximum bike wheelbase: 60" - Maximum tire width: 5" - Features extra heavy duty wheel holders, an internally reinforced frame and external brace for heavy load carrying capacity - Includes keyed alike locking hitch pin, 8' security cable and locking frame hooks - Patented "No-Wobble Hitch System" eliminates slack between the receiver and the rack without the use of tools - Folds flat against car when not in use - Tilts down for easy cargo door access - Space between bikes: 10 - For 20" Fat tire rear wheels you will need a Small Wheel Adapter (SW-ADP-U) to prevent derailleur hanger interference (You will only need one per bike) - For step through bicycles you will need to also purchase a Bike Adapter - Rack Weight: 58 lb - Limited Lifetime Warranty - Not to be used on any trailer, fifth wheel or towed vehicle