Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Fenders

$20.99
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use.
- Length: 445mm (7.5")
- Weight: 160g (5.6oz)

$32.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology.
- High performance dual compound plastic
- Easy quick-release-fastening by pre-adjusted powerstrap
- 2 joints for optimized adjustment to all frames
- Optimized dirt protection
- 27.5+ and 29-inch wheel compatible

$21.99
Turn your bike into an all-weather vehicle with SKS's Beavertail Fender Set! The robust steel brackets provide safe and easy mounting, and the front fender works with most suspension forks.

$32.99
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes.
- Virtually unbreakable high quality dual compound plastic
- Hidden chuck cone adapter which is fitted once during first assembly
- Easy quick-release fastening
- Optimized dirt protection
- Fits almost all suspension forks
- 27.5+ and 29-inch wheel compatible

$67.99
Mudguard in pure form: EDGE AL guarantees city and trekking cyclists ideal splash protection on the road. This aluminum mudguard mounts close to the tire and offers great stability, although it is only attached at three points. No load rack is necessary to attach EDGE AL. With a purist matte-black look and an angular profile, EDGE AL integrates itself almost invisibly into the frame.
- Urban fender set
- Sturdy aluminum profile design for urban bikes
- Black U-stay
- Includes accessory parts and stays
- Weight: 568g

$19.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.

$79.99
The SKS SPEEDROCKER has been specifically developed for compatibility with gravel and adventure bikes, cyclocross bikes and road bikes with tyres exceeding 32mm. Proudly Made in Germany, the Speedrocker offers incredible stability over the roughest tracks while also providing optimum protection in all weathers.
- Rear fender expands for custom fit
- Rubber fasteners mount to a variety of frame styles

$20.95
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 27.5- or 29-inch wheeled bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

$29.99
Front Fender:
• Front fender made of durable all-weather polymer
• Mounts to most suspension and rigid forks
• Fits oversized tapered steer tubes along with small and standard sizes. (18.5-34.5mm ID)
• Extra-wide profile for 3-5" wide tires
Rear Fender:
• Minimalist seat post fender made of durable all-weather polymer material
• Quick-release mount snaps on and off in seconds
• Wide profile design
• Features an adjustable fender angle to fit most bikes
• Extra wide profile to fit 3-5" tires

$14.99
Topeak's DeFender RX rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release seatpost attachment allows the DeFender to be installed and removed in seconds.

$15.99
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use.
- Length: 370mm (14.5")
- Weight: 60g (2.1oz)

$24.99
Topeak's DeFender M2 rear fender offers durable rain and mud protection on wet and sloppy rides. It's incredibly light and easy-to-use, too. The quick-release attachment fits most seatposts and allows the DeFender to be installed and removed in seconds. Plus, the 2-pivot arm is super adjustable for better coverage and a perfect fit on any bike.

$62.99
- Color: Black
- Maximum Tire Width: 35 mm
- Fender Width: 45 mm
- Wheel Size: 700c
- Material: Aluminum
- Requires Eyelets?: Yes

$24.99
Easy-to-install rear fender for your fat bike.
CONSTRUCTION
• Virtually unbreakable polypropylene body
MOUNTING SYSTEM
• Adjustable rubber straps mount to down tube
• 100% recyclable
• Ships and merchandises as a flat sheet and snaps onto the included seat tube bracket
• Hardware included
• Weight: 190 grams / 6.7 ounces

$21.99
- Suitable for tire widths between 23mm and 42mm
- Cable routing friendly
- Not recommended for use with non-housed/exposed rear brake cables
- Keeps you clean and dry on wet roads and trails
- Newly improved designs in multiple options for better coverage
- Attaches quickly without tools
- Stores easily in a backpack or jersey pocket
- Application: Front
- Fender Size: 390mm x 110mm
- Wheel Size: Universal
- Material: Polypropylene
- Weight: 30g

$59.99
Keep both your bike and yourself clean and dry with Sunlite's Full Fender Set. These fenders offer full coverage for the rider who rides year round in any weather. The stays are steel and the fenders are polycarbonate so they're tough, light and durable.

$26.99 - $34.99
Lightweight, removable fender intended for MTB use
- Adjustable rubber straps make installation quick and easy
- 100 percent recyclable polypropylene

$9.99
The Cascadia Fender Hardware Kits are compatible with Cascadia fenders, Hardcore fenders, and Full fenders.
Includes:
- Rear fender plastic clip
- Fork and brake bridge-thru bolts
- Stay bolts and lock washers
- Disc adaptor spacers (60mm & 65mm widths only)
Specific compatibility w/Planet Bike Fenders:
- 35mm Width: 700c x 35mm Fenders (Cascadia & Hardcore)
- 45mm Width: 700c x 45mm Fenders (Cascadia, Hardcore, and Full)
- 60mm Width: 26-inch x 60mm Fenders (Cascadia & Hardcore)
- 65mm Width: 29-inch x 65mm (Cascadia)

$29.99
Keep water and mud at bay with SKS's Dashblade fender! It's light and easy to install and remove thanks to its quick-release strap that fits a wide variety of seatposts and seat tubes.

$59.99
The ultimate set of mudguards for fat tire bikes offering all-round mud protection. Front is mounted easily under the down tube by high-performance straps and the rear fits to the seat post in seconds with the proven tool-free SKS quick-release Powerstrap attachment system. The two-hinge arm in the rear allows perfect adjustability to the geometry of your bike.

$9.99
Keep water and mud off you with SKS's Mud-X down tube fender! This versatile fender works with most bikes regardless of wheel size.

$59.99
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support.
- Compatible only with disc brakes
- Includes hook-and-loop fasteners and tension rubber
- Weight: 580g
- Max. outer diameter: 35mm
- Wheel size: 27.5" (650B), 28"
- Tire width: 52mm
- Length, front fender: 680mm
- Length, rear fender: 870mm

$74.99 - $79.99
IMPACT-RESISTANT CLEANERS FOR THE BIKE
Fender set made of robust sandwich construction
A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion.
Stylish driving fun with a safety system
With its glossy black surface and black fastening components, the BLUEMELS BASIC also leaves nothing to be desired in terms of looks. The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts.
- Aluminum/plastic sandwich construction
- V-struts with fixed bridges for flexible adjustment
- ASR safety system
- Bottom bracket cutouts
- Made in Germany

$89.99
- Rugged 6061 aluminum construction is corrosion resistant
- 100mm mudflaps provide ultimate coverage and are double-riveted for durability
- Hardware is all stainless-steel and pre-installed for hassle-free mounting
- V-stays for added stability
- Disc brake compatible
- 50mm width
- Release Tabs on front fender for added safety
- Meets EN test standards

$89.99
Turn your bike into an all-weather vehicle with Planet Bike's Cascadia ALX Fenders. Made of unbreakable corrosion-resistant 6061 aluminum with stainless-steel stays, they're ultra tough. They boast long mudflaps for the ultimate in splash and spray protection plus release tabs on the front fender for easy on/off. The hardware's even pre-installed for quick mounting.

$18.99
Topeak's DeFender M1 front fender offers durable rain and mud protection on wet and sloppy rides for your 26-inch bike. It's incredibly light and easy-to-use, too. The M1 installs easily to any standard fork, even reverse arch designs and seamlessly integrates with the front end of your bike. The quick-release attachments allow the DeFender to be installed and removed in seconds.

$37.95
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender front and rear fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide.
- QR fork attachment fits 19.6mm/26mm/27.7mm/35mm steerer tube (FX); QR seatpost attachment (RX)
- Two tone injected high impact resistant plastic
- Weight: 233 grams (FX); 226 grams (RX)
- Rear angle adjustable
- Size: 73 x 21 x 11 / 28.7” x 8.3” 4.3” (Front); 61 x 18 x 10 / 24” x 7.1” x 3.9” (Rear)

$18.99
Specifically designed for 27.5” and 29” wheeled MTB’s. The DeFender RX 279er fenders are the perfect choice for lightweight durable mud protection on those wet and sloppy rides. Quick release allows DeFenders to be installed and removed in seconds. A highly polished underside helps prevent dirt buildup and aids in cleaning. Fits 27.5” – 29” MTB tires up to 3” wide.
- Clamp Diameter: Universal, endless strap type
- Quick release allows DeFender to be installed and removed in seconds
- Rear angle adjustable
- Injected molded nylon
- Dimensions (L x W x H): 22 x 4 x 6"
- Weight: 226 grams

$49.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.

$59.95
The Topeak DeFender TX is a compact trekking bike fender set. Adjustable aluminum struts with QR levers for quick, perfect alignment and good tire coverage. The DeFender TX set is made of high impact plastic and the highly polished underside prevents dirt buildup. Fits tires up to 700 x 44c.
- Brake bolt and fork eyelets attachment (front) Seat tube and seatstay or chainstay eyelets attachment
- Injected high impact resistant plastic with aluminum struts
- Adjustable angle and position for perfect tire coverage
- 56.8 x 13.7 x 8.4 cm /22.4” x 5.4” x 3.3” (Front); 77. 8 x 26. 5 x 8.6 cm /30.6” x 10.4” x 3.4” (Rear)
- Weight: 192 grams (Front); 245 grams (Rear)
Page 1 of 4
Next page